Product ID:7016 0.125 10 LB ELECTRODE AWS A5.1 E7016
MSDS Date:12/02/1985
FSC:3439
NIIN:00-984-4771
MSDS Number: BGBNJ

AIRCO WELDING PRODUCTS DIV OF BOC GROUP INC

575 MOUNTAIN AVE
NEW PROVIDENCE, NJ 07974-2006
US

Emergency Phone: 908-771-1381

Info Phone: 908-771-1381

Cage: 83923

DIV OF THE BOC GROUP INC AIRCO INC

MURRAY HILL, NJ 07974 US

Telephone: 908-665-2400

Cage: 6S493

IRON *97-2*

CAS: 7439-89-6

RTECS: NO4565500

OSHA PEL 5 MG/CUM

ACGIH TLV: 5 MG/CUM

SILICON *97-2*

CAS: 7440-21-3

RTECS: VW0400000

OSHA PEL 10 MG/CUM

ACGIH TLV: 10 MG/CUM

MANGANESE *97-2*

CAS: 7439-96-5

RTECS: OO9275000

OSHA PEL 5 MG/CUM

ACGIH TLV: 1 MG/CUM

SODIUM (NATRIUM)

CAS: 7440-23-5

RTECS: VY0686000

FLUORINE

CAS: 7782-41-4

RTECS: LM6475000

OSHA PEL 0.2 MG/CUM

ACGIH TLV: 1.6 MG/CUM

EPA Report Quantity: 10 LBS

DOT Report Quantity: 10 LBS

CALCIUM CARBONATE (MARBLE) (LIMESTONE)

CAS: 1317-65-3

RTECS: EV9580000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9192

MAGNETITE, MAGNETIC OXIDE

CAS: 1309-38-2

RTECS: OM4800000

OSHA PEL 5 MG/CUM

ACGIH TLV: 10 MG/CUM

OZONE

CAS: 10028-15-6

RTECS: RS8225000

OSHA PEL 0.2 MG/CUM

ACGIH TLV: V 0.20 MG/CUM

CARBON DIOXIDE *97-2*

CAS: 124-38-9

RTECS: FF6400000

OSHA PEL 5000 PPM

ACGIH TLV: 5000 PPM

CARBON MONOXIDE

CAS: 630-08-0

RTECS: FG3500000

OSHA PEL 50 PPM

ACGIH TLV: 50 PPM

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: MAY CAUSE NOSE, THROAT/EYE
IRRITATION, SIDEROSIS, DEATH. ARC RAYS: MAY CAUSE 2ND & 3RD DEGREE
BURNS TO SKIN. CONTACT W/ELECTRICAL WELDING EQUIPMENT CAN KILL.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, BURNS, DISCOMFORT, DIZZINESS,
NAUSEA, DRYNESS, UNCONSCIOUSNESS.

First Aid:INHALATION: GIVE OXYGEN/CPR IF NEEDED. OBTAIN MEDICAL
ATTENTION IN ALL CASES.

Unusual Fire/Explosion Hazard:NON-FLAMMABLE. WELDING ARC & SPARKS CAN
IGNITE COMBUSTIBLES & FLAMMABLE PRODUCTS.

Handling and Storage Precautions:TRAIN WORKER TO KEEP HEAD OUT OF FUME
PLUME. PROVIDE PROTECTIVE SCREENS & FLASH GOGGLES TO SHIELD OTHERS.
Other Precautions:COMPOSITION OF FUMES & GASES DEPENDS UPON METAL BEING
WELDED, COATINGS ON METAL, AIR CONTAMINANTS FROM CLEANING &
DEGREASING SOLVENTS, INGREDIENTS OF ELECTRODES. TAKE AIR SAMPLES
INSIDE WELDER'S HELME T/BREATHING ZONES TO FIND COMPOSITION.

Respiratory Protection:WEAR A NIOSH APPROVED FUME/AIR-SUPPLIED
RESPIRATOR WHEN WELDING IN CONFINES SPACES/WHERE VENTILATION
DOESN'T KEEP FUME EXPOSURES Ventilation:GENERAL, LOCAL EXHAUST AT ARC/BOTH TO KEEP FUMES & GASES
Protective Gloves:LEATHER
Eye Protection:GOGGLES & WELDING HELMET W/FILTER LENS
Other Protective Equipment:ARM & SHOULDER PROTECTORS, APRON, FACE
SHIELD, HARD HATS
Supplemental Safety and Health
QUANTITY OF FUMES TO WHICH WELDER IS EXPOSED DEPENDS UPON WELDING
PROCESS, NUMBER OF WELDERS IN WORK AREA, VOLUME OF WORK AREA,
AMOUNT OF VENTILATION & WHETHER WELDER KEEPS HEAD OUT OF FUME
PLUME.

HCC:N1
Appearance and Odor:FLUX COATING ON A SOLID METAL CORE WIRE IN CUT
LENGTHS.

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:IRON OXIDE, TITANIUM DIOXIDE, SILICON
OXIDE, MANGANESE, OZONE, CO, CO2.

Waste Disposal Methods:DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE
CONTAINER/LINER IAW/FEDERAL, STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.